Modules

Here are the packages with brief descriptions (if available):

[detail level 123456]

▼NStemmer
►NCvb
►NAsync
CAcquisitionExtensions	Async wrapper methods for IAcquisition objects.
CNamespaceDoc	The namespace Stemmer.Cvb.Async contains extension methods for Driver.IAcquisition types (like Device Driver.Streams) to use it with async/await.
►NBarcode
►NConfiguration
►NBaseClasses
CGrader2DConfigurationBase	Base class for 2D grading configurations.
CGraderConfigurationBase	Base class for Barcode grading configurations.
CNamespaceDoc	The namespace Stemmer.Cvb.Barcode.Configuration.BaseClasses contains base classes for the different symbology-specific barcode reader configurations. These classes are usually abstract and not intended to be used directly but only through their derived classes which are located in Stemmer.Cvb.Barcode.Configuration.
CReader2DConfigurationBase	Base class for all 2D reader configurations.
CReader2DWithQuietzoneConfigurationBase	Base class for 2D reader configurations that support a quiet zone check.
CReaderCommon1DConfigurationBase	Configuration class that aggregates the most common 1D code reading settings.
CReaderConfigurationBase	Base class for Barcode reading configurations.
CReaderEanUpcConfigurationBase	Base class for EAN and UPC configurations.
CReaderFourStateConfigurationBase	Base class for Four State codes.
CReaderPlanetPostnetConfigurationBase	Base class for Postnet and Planet codes.
CReaderWithBooleanCheckDigitConfigurationBase	Configuration based on the common 1D settings with added eval check digit flag.
CReaderWithQuietzonConfigurationBase	Base class for all reader configurations that support quiet zone checking.
CReaderWithTransmitStartStopConfigurationBase	Configuration based on the common 1D settings with added flag for transmission of start/stop digit.
CBarcodeGrading	Grading configuration for 1D Barcodes.
CBase	Base class for all Barcode reader configuration objects.
CCodabar	Reader configuration for Code93
CCode11	Reader configuration for Code11.
CCode128	Reader configuration for Code128 codes.
CCode32	Configuration for Code32 reading.
CCode39	Reader configuration for Code39
CCode93	Reader configuration for Code93
CDataMatrix	Configuration for DataMatrix Code reading.
CDataMatrixGrading	Configuration settings for data matrix grading.
CDiscrete2Of5	Reader configuration for Discrete 2 of 5 codes.
CEan13	Reader configuration for EAN13 codes.
CEan8	Reader configuration for EAN8 codes.
CFourStateAustralian	Reader configuration for Four State Australian Codes.
CFourStateKix	Reader configuration for Four State KIX Codes.
CFourStateRoyalMail	Reader configuration for Four State Royal Mail Codes.
CFourStateUsps	Reader configuration for Four State USPS Codes.
CInterleaved2Of5	Reader configuration for Interleaved 2 of 5 codes.
CMicroPdf417	Configuration for MicroPdf417 reading.
CMsiPlessey	Reader configuration for Msi Plessey codes.
CNamespaceDoc	The namespace Stemmer.Cvb.Barcode.Configuration contains what is necessary to define a configuration for either barcode reading or barcode grading (see ReaderConfig and Reader).
CPdf417	Configuration for PDF 417 reading.
CPharmaCode	Configuration for Pharma Code reading.
CPlanet	Configuration for Planet Code reading.
CPostnet	Configuration for Postnet Code reading.
CQR	Configuration for QR code reading.
CQRGrading	Configuration settings for QR grading.
CRSS	Configuration for RSS code reading.
CSonyCode	Configuration for Sony Code reading.
CUpcA	Reader configuration for UPC A codes.
CUpcE	Reader configuration for UPC E codes.
NProperties
CGradeResult1D	Grading result for 1D codes.
CGradeResult2DBase	Base class for 2D grading results.
CGradeResultBase	Code grading result base class.
CGradeResultDataMatrix	DataMatrix grading results.
CGradeResultQR	QR grading results.
CNamespaceDoc	The types implemented in the namespace and assembly Stemmer.Cvb.Barcode and its sub namespaces expose the features of the CVCBarcode.dll in Cvb.Net.
CReader	The actual barcode reading functionality.
CReaderConfig	Barcode reader object.
CReadResult	Common result components of a barcode read operation.
CReadResult1D	Read Result of a 1D code.
CReadResult2D	Read results for matrix codes.
CReadResultCode128	Read results for Code 128.
CReadResultCode39Code93	Read results for Code 39 and Code 93.
CReadResultDataMatrix	Read result for DataMatrix codes.
CReadResultPdf417	Read result for Pdf417 codes.
CReadResultQR	Read result for QR codes.
CReadResultSonyCode	Read result for Sony codes.
CReadResultUpcE	Read results for UPC-E codes.
CResultAnalysis	Extension functions for analyzing Barcode results.
CSymbologyAnalysis	Extension methods to analyze symbologies
►NCollections
►NGeneric
CCollectionExtensions	Extension methods for use with generic collections
CInfoCollection	Generic collection of information objects.
CLicenseCollectionExtensions	Extension methods for use with generic collections of license information.
CNamespaceDoc	The namespace Stemmer.Cvb.Collections.Generic contains type definitions that make working with generic containers from System.Collections.Generic that hold objects specific to Common Vision Blox easier.
CReadOnlyCollection	Read-only, generic collection of elements.
CReadOnlyDictionary	Read-only, generic collection of key/value pairs.
CReadOnlyDictionaryBase	Base class for read-only, generic collection of key/value pairs.
►NDnc
►NSearch
CFinder	Match3D DNC finder used to perform a search on a PointCloud.
CSearchParameters	Definition of search parameters. Search parameters strongly influence the search results. Likewise, they have great influence on the timing of a search operation.
CSearchResult	Single result of a Finder.Find(DensePointCloud,SearchParameters) operation.
CTeachParameters	Parameters for teaching a Match3D Dnc finder.
►NDriver
►CAccessToken	Parsed (partial) access token.
CDevice	A GenTL producer device.
CGenApiFeature	Contains the triplet of NodeMap identifier, Node name and value.
CInfo	Info properties of a module layer.
CInterface	Represents an interface module of a GenTL producer.
CNode	Base element of the module layers.
CParameter	A GenTL Producer dependent parameter to set.
CTransportLayer	Represents a GenTL Producer.
CVin	Represents a vin driver module.
CBuffer	A simple contiguous block of memory.
►CBufferImage	Stream image that is returned when no IRingBuffer interface is available.
CImageLayout	Contains the buffer layout of a Image for fast BufferImage creation.
CCompositeStream	Stream that returns composites.
CCompositeStreamBase	Base class for streams that work with composites.
CDeviceControlCommand	A specific command to send to the driver.
CDeviceEventArgs	Event argument for notifying a device change.
CDeviceImage	Special device image.
CDeviceNodeMapDictionary	NodeMapDictionary for Devices.
CDiscoveryInformation	Stores information on a discovered device/node.
CDiscoveryInformationList	Contains all results from a discovery run.
CEmuDevice	A Device representing an image stream based on single image files.
CEmuImage	Image of a CVB emulation object.
CGenICamDevice	Device supporting typed composite streams.
CIAcquisition	Interface for all streaming devices
CIBuffer	A simple contiguous block of memory.
CIDeviceControl	Driver specific get or set operations on a Device.
CIDeviceInterface	Base interface of all Device interfaces.
CIDigitalIO	Digital I/O operations on a Device.
CIImageRect	Image rectangle query and change operations.
CImageStream	Stream that delivers images.
CIndexedStream	A stream with a finite number of images, which can also be accessed via an ImageIndex.
CINotifyObservable	Observable of of the INotify interface.
CIPfncBuffer	A Buffer that has GenICam layout information available.
CIRegPort	Enables direct memory access on the device.
CIRingBuffer	RingBuffer operations on a Device.
CISoftwareTrigger	Software trigger interface to trigger image acquisition from the application.
CIStream	Base class for all device streams.
CMultiPartImage	A StreamImage that can have more Parts associated with it.
CNamespaceDoc	The types in the namespace Stemmer.Cvb.Driver expose part of the functionality covered by the CVCDriver.dll.
CNodeMapDictionary	Device dictionary holding all node maps.
CNodeMapNames	Contains all known node map names.
CNonStreamingDevice	A Device representing a device without any streaming capabilities.
CNotifyDictionary	Read-only collection containing all INotify events of a Device.
CNotifyEventArgs	Event argument for notification events.
CPfncBuffer	A Buffer that has GenICam layout information available.
CPointCloudStream	Stream that delivers PointClouds.
CRingBufferImage	Stream image that is returned, when the IRingBuffer interface is available on a device.
CStream	Represents one acquisition stream of a Device.
CStreamImage	Base class of all stream related images.
CStreamNodeMapDictionary	NodeMapDictionary for Streams.
CStreamStatistics	Gives access to stream related statistics.
CVideoBufferImage	Acquired image in a video stream.
CVideoDevice	A Device representing a video stream from the hard disk.
CVideoImage	Image of a video.
CVinConnectionInformation	Contains the board and port information of a Device or its access token.
CVinDevice	A Device representing a video interface driver (vin).
CVinImage	Image of a CVB Virtual Interface object.
►NExtensions
NProperties
CDrawingExtensions	Extension methods for the members of the System.Drawing namespace.
CImageExtensions	Extension methods on the Image object.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Extensions contains static classes with extension methods that make cooperation with other APIs like System.Drawing. Please note that the assembly Stemmer.Cvb.Extensions.dll is dependent on other assemblies that may not be present on all supported platforms.
►NForms
►NComponents
CErrorEventArgs	Event arguments containing an Exception.
CImageEventArgs	Event arguments containing one StreamImage.
CNamespaceDoc	The namespace Stemmer.Cvb.Forms.Components contains visual components that may be used for creating Windows Forms applications in the Forms Designer.
CStreamHandler	Helper component to handle acquisition on a stream.
►NControls
CArea2DDragEventArgs	Event argument class for both Rectangular AOI related events
►CDisplay	.NET display control for Common Vision Blox
CZoomState	Class that memorizes a Display's zoom state for the purpose of later on restoring that state.
CGenApiGrid	GenICam GenApi Grid control.
CLabelEventArgs	Event argument class for label-related events
CNamespaceDoc	The namespace Stemmer.Cvb.Forms.Controls contains the GDI and DirectDraw/Direct3D based Common Vision Blox display and the GenApi grid as components that may be used in Forms applications or inside a FormsHost container or in the Visual Studio Forms designer, along with supporting type definitions.
COverlayEventArgs	Event argument class for overlay-related events
COverlayPluginEventArgs	Event that refers to overlay plugins.
COverlayPluginMouseOverEventArgs	Event that refers to overlay plugin mouse over notifications.
CRectDragEventArgs	Event argument class for both Rectangular AOI related events
CRubberMeasurementEventArgs	Event argument class for measurement-rubber-related event
CStatusLineUpdatedEventArgs	Event that indicates a change in the status line of a display.
CUserOverlayEventArgs	Event that refers to user overlays.
CUserOverlayMouseOverEventArgs	Event that refers to user object mouse over notifications.
►NOverlays
►NPluginData
CArcPlugInData	Plugin Data structure for the Arc plugin
CBitmapPlugInData	Plugin Data structure for the Bitmap and the FixBitmap plugins.
CCompassPlugInData	Plugin Data structure for the Compass plugin.
CImagePlugInData	Plugin Data structure for the image-in-image plugin.
CNamespaceDoc	This namespace contains all the plugin data structures used internally. Library users will usually not interact directly with these objects.
CPenStylePlugInData	Plugin data for pen styles. Recognized by Area, Circle, Crosshair, FixCircle, Line, Rectangle and RotatedCrosshair plugin.
CPixelListPlugInData	Plugin Data structure for the PixelList plugin.
CPolyLinePlugInData	Plugin Data structure for the PolyLine plugin.
CRotatedRectPlugInData	Plugin Data structure for the RotatedRect plugin.
CTargetPlugInData	Plugin Data structure for the Target plugin.
CTextOutPlugInData	Plugin Data structure for the TextOut plugin.
CArcOverlay	An arc zoom factor
CArea2DOverlay	An overlay object representing an Area2D object on a Display.
CBitmapOverlay	A "target" - in principle a stack of crosshair plugins
CCircleOverlay	An circle overlay.
CCircularTargetOverlay	Target overlay consisting of stacked circles
CCompassOverlay	Compass plugin, indicating text and optionally an angle.
CCrossHairOverlay	A simple Crosshair overlay.
CDisplayLabel	Display Label.
CDisplayObjectList	A Collection class for displayable object collections
CExtendedOverlayPluginBase	Base class for all overlays that come with a plugin data structure
CFixedSizeBitmapOverlay	A "target" - in principle a stack of crosshair plugins
CFixedSizeEllipseOverlay	An ellipse overlay that does not change size regardless of the display's zoom factor
CImageOverlay	A picture in picture display of a CVB image by means of an overlay.
CLineOverlay	A simple line overlay.
CNamespaceDoc	The overlay plug ins (based on the *.opi files of the Common Vision Blox installation) that may be used with the Display control are located in the namespace Stemmer.Cvb.Forms.Overlays.
COverlayBase	Base object for all displayable objects (currently labels and overlay plug in objects)
COverlayDictionary	Dictionary that provides access to the list of installed CVB overlay plugins.
COverlayList	Label collection object.
COverlayPluginBase	Overlay plugin object
COverlayPluginInfo	Object gathering all relevant information about an installed overlay plugin.
CPenStyleOverlayPluginBase	Base class for all overlays that use pen width and pen style through a TPenStylePluginData structure.
CPixelListOverlay	A pixel list overlay that marks each pixel individually.
CPolyLineOverlay	A polygon overlay.
CRectangularTargetOverlay	Target overlay consisting of stacked rounded rectangles
CRectOverlay	An overlay representing a Rect object.
CRotatedCrossHairOverlay	A simple Crosshair overlay.
CRotatedRectangleOverlay	A Rotated Rect.
CSmartRectOverlay	A rectangle object
CTargetOverlay	A "target" - in principle a stack of crosshair plugins
CTextOverlay	A label with selectable font properties (note: not all available font attributes are supported...).
CUserOverlay	User-definable overlay. This type of overlay does not use a predefined appearance, but needs to be user-drawn using a subset of the GDI functionality exported by the Aux.Drawing.UnmanagedGraphics object.
CUserOverlayPaintEventArgs	Paint arguments for UserOverlays. These are basically identical with the PaintEventArgs objects from the auxiliary DLL, with the addition of the drag handle index.
NProperties
►NVisualTools
CNamespaceDoc	Stemmer.Cvb.Forms.VisualTools contains base class definitions for interactive tools that are visible and movable on a Display control and whose execution logic is to be implemented in a derived class.
CVisualArea2DClassicToolBase	Base class for Visual Tool objects that work on a Rect.
CVisualArea2DToolBase	Base class for Visual Tool objects that work on a Rect.
CVisualLineToolBase	Base class for Visual Tool objects that work on a line.
CVisualRectToolBase	Base class for Visual Tool objects that work on a Rect.
CVisualToolBase	Base class for all Visual Tool Objects.
CVisualToolErrorEventArgs	Error Event arguments class used by VisualToolBase- derived objects.
CVisualToolEventArgs	Event arguments class used by VisualToolBase-derived objects.
CClipboard	Mimics the class System.Windows.Forms.Clipboard by additional static functions.
CFileDialogs	Container class for utility functions for file dialogs.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Forms contain the GDI and DirectDraw/Direct3D based Common Vision Blox display implemented in the CVCDisp.dll as well as the GenApi grid implemented in CVGenApiGrid.dll. It also gives access to the Common Vision Blox overlay plug ins from within Cvb.Net.
►NFoundation
NProperties
NUtilities
CAddNoise	Collection of functions that add noise to Cvb Images.
CAlignment2DResult	Result of a curve alignment.
CAlignmentSettings	Settings to configure the Curve.Align method.
CAnalysis	Collection of miscellaneous image analysis functions.
CAQS12DensePointCloudSegmentor	Segmentor for face segmentation of an AQS12 calibration piece on dense point clouds.
CAQS12Piece	Aggregates the data that describes the AQS12 calibration piece.
CAQS12RangeMapSegmentor	Segmentor for face segmentation of an AQS12 calibration piece on range maps.
CArithmetic	Collection of arithmetic functions from the Foundation Package.
CBayerConversion	Functions for converting images with a Bayer pattern.
CBitwise	Collection of bit-wise operations on images.
CBlob	Blob search and binarization methods.
CBlobFilter	For building filters for the Blob.Search.
CBlobFilterBuilder	Helper to build filters for a blob search.
CBlobResult	Container for a blob analysis result.
CCalibrationConfiguration	Stores the configuration for the calibration.
CCalibrationLineScan	Collection of calibration line scan functions.
CCalibrationPattern	Methods for CVB calibration pattern handling.
CCalibrator3DExtensions	Extension methods for the Calibrator3D.
CConvert	Class with various image conversion functions.
►CConvertColorSpace	Color space conversions supported by the Foundation Package.
CColorTwistMatrix	Matrix defining color transformations.
CCorrelation	Collection of functions that calculate different kinds of correlation values.
CCurve	2D curve functions.
CCurveExtensions	Extension methods for a curve (Point2Dd array).
CDensePointCloudSegmentor	Base class for configuring and computing segmentation on dense point clouds.
CEdge	Collection of functions for Edge detection.
CEdgeDetectionResult	Result of the function DetectEdgesOfStripeTarget.
CEdgeResult	Edge Search result
CEdgeResultPair	A pair of found edges.
►CFft	Collection of FFT functions.
CFilter	Creation functions for FFT filters.
CFftImage	Cvb Image representation in the Fourier domain.
CFilter	Collection of Filter methods supported by the Common Vision Blox Foundation Package.
CGaussianPyramid	Functions implementing a Gaussian pyramid approach.
CHistogram	A single histogram result.
CHistogramAnalyzer	Functionality for analyzing the Histogram of images (previously found in the LightMeter tool).
CHistogramExtensions	extends the long[] class by methods that help analyze a histogram.
CHuMoments	Results of Hu Moment calculation.
CImageExtensions	Extension methods the Foundation Package adds to Image objects.
CImageMoments	State object for calculating various image moments.
CLaserLineExtraction	Contains functions used to extract laser lines from images.
CLineExtractionParameters	All necessary parameters for laser line extraction.
CLineScanCalibrationConfiguration	A set of parameters, which is used to configure line scan calibration calculated with function CalibrationLineScan.CreateLineScanCalibration.
CLineScanCalibrator	Result of the linescan calibration executed by the CalibrationLineScan.CreateLineScanCalibration function.
CLut	Lookup table functions.
CLutLevel	Struct that pairs a LUT level and the value assigned to this level.
CMetric	Metric calibration routines.
CMorphology	Morphological filter operations available from the Common Vision Blox foundation package.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Foundation holds all classes and definitions that expose functionality of the Common Vision Blox Foundation Package. The Foundation Package comprises the following DLLs: Arithmetic.dll etBayerToRGB.dll CVCEdge.dll CVFoundation.dll DrawGraph.dll (not covered here) LightMeter.dll TextOut.dll Note that a valid Common Vision Blox Foundation Package license is required to use this functionality unrestricted. If no license is available, function-specific restrictions apply.
CNonLinearTransformation	Object implementing the non linear polynomially approximated transform implemented in the CVB Foundation Package.
CNorm	Functions for calculating different norms over the gray values of an image.
CPerspectiveTransformation	Perspective transformation coefficients.
CPolarization	Functions and type definitions of the CVPolarization library.
CProjection	Projection that the Edge analysis of Common Vision Blox is using.
CProjectionValue	Single projection value.
CRangeMapSegmentor	Base class for configuring and computing segmentation on range maps.
CRegression	Various regression functions.
CScale	Class with various image scaling functions.
CTestImages	Functions for test image generation.
CThreshold	Thresholding functions in the Common Vision Blox Foundation Package.
CTransform2D	Collection of 2D transformation functions (most of them linear).
►NGenApi
CBooleanNode	Node representing a true/false value.
CCategoryNode	Node that logically groups other nodes.
CCommandNode	A node that can be executed.
CEnumEntryNode	One entry in an enumeration.
CEnumerationNode	A node that presents a choice of values.
CFloatNode	Represents a floating point number.
CFloatRegNode	Floating point value register.
CGenApiVersion	Version information for GenICam related objects.
CIBooleanNode	GenICam GenApi node with a bool value.
CICategoryNode	GenICam GenApi node grouping other INode objects.
CICommandNode	GenICam GenApi node that is executable.
CIEnumEntryNode	GenICam GenApi node representing one enumeration entry.
CIEnumerationNode	GenICam GenApi node containing named values.
CIFloatNode	GenICam GenApi node that has a double value.
CIIntegerNode	GenICam GenApi node that has a long value.
CINode	Generic GenICam GenApi node.
CINodeMap	Read-only dictionary holding all INodes of a device or module.
CIntegerNode	Represents a floating point number.
CIntRegNode	Integer value register.
CIPortNode	GenICam GenApi node that enable read/write access to e.g. a device.
CIRegisterNode	GenICam GenApi register node.
CISelectorNode	GenICam GenApi node that can select others.
CIStringNode	GenICam GenApi node that has a string value.
CIValueNode	GenICam GenApi node having a value.
CNamespaceDoc	The types in the namespace Stemmer.Cvb.Driver.GenApi expose and implement the functionality covered by the CVGenApi.dll.
CNode	Basic GenApi node for device feature access.
CNodeMap	Contains all nodes of a device or module.
CPortNode	Port nodes are the connection to the remote device.
CRegisterNode	Untyped register access (only memory).
CSelectorNode	Groups Nodes, that are dependent on this one
CStringNode	String value node.
CStringRegNode	String value register.
CValueNode	Base class for all Nodes, that have a value.
►NGeometry2D
CCircle	Class representing a circle (for the purpose of regression and other calculations).
CEllipse	Class representing an ellipse (for the purpose of regression and other calculations).
CLine	Object representing an infinite line in 2 dimensional space.
CLineSegment	A line segment between two points.
CNamespaceDoc	The namespace Stemmer.Cvb.Geometry exposes some elementary geometrical primitives that one or more modules of Common Vision Blox are working with (e.g. for regression purposes).
►NGeometry3D
CPlane	A plane in 3D space in Hessian normal form.
►NGevServer
CBooleanNode	GenApi.BooleanNode that is configurable.
CCategoryNode	Node that groups other nodes.
CChunkImageBufferDescription	Describes a GenICam Pixel Format Naming Convention (PFNC) compatible image memory buffer with possibly additional data.
CCommandNode	GenApi.CommandNode that is configurable.
CEnumEntryNode	An entry for an EnumerationNode.
CEnumerationNode	GenApi.EnumerationNode that is configurable.
CFloat32RegNode	An float typed, configurable IRegisterNode.
CFloat64RegNode	An double typed, configurable IRegisterNode.
CFloatBaseNode	Base class for all float based nodes.
CFloatNode	GenApi.FloatNode that is configurable.
CFloatRegNode	A floating point typed, configurable IRegisterNode.
CGenApiEvent	Identifies a GenApi event that can be sent via a GevServer's MessageChannel.
CGevServer	Common Vision Blox GigE Vision Server implements a GigE Vision camera in software.
CGevServerStateChangedEventArgs	Event arguments for GevServer state changes.
CIConfigurableCategoryNode	A ICategoryNode that is configurable.
CIConfigurableCommandNode	ICommandNode that is configurable.
CIConfigurableEnumEntryNode	IEnumEntryNode that is configurable.
CIConfigurableEnumerationNode	IEnumerationNode that is configurable.
CIConfigurableFloatBaseNode	Base interface for all configurable float nodes
CIConfigurableFloatNode	IFloatNode that is configurable.
CIConfigurableFloatRegNode	IConfigurableRegisterNode for float registers.
CIConfigurableIntegerBaseNode	Base class interface for all configurable integer nodes.
CIConfigurableIntegerNode	IIntegerNode that is configurable.
CIConfigurableIntRegNode	IConfigurableRegisterNode for integer registers.
CIConfigurableNode	Configurable INode.
CIConfigurableNodeMap	An INodeMap that can be configured.
CIConfigurableRegisterNode	IRegisterNode that is configurable.
CIConfigurableSelectorNode	ISelectorNode that is configurable.
CIConfigurableStringNode	Base class interface for all configurable string nodes.
CIConfigurableValueNode	Configurable IValueNode.
CImageBufferDescription	Describes a GenICam Pixel Format Naming Convention (PFNC) compatible image memory buffer.
CInt32RegNode	An Int32 IntRegNode node.
CInt64RegNode	An Int64 IntRegNode node.
CIntegerBaseNode	Base class for all integer based nodes.
CIntegerNode	GenApi.IntegerNode that is configurable.
CIntRegNode	An int typed, configurable IRegisterNode.
CIntSwissKnifeNode	Read only node to calculate formulas on the client side with integer arithmetic.
CISwissKnifeNode	Interface for GenICam GenApi SwissKnife nodes of type TNode.
CLogicalNetworkInterface	An IP network interface the GevServer can be bound to.
CMessageChannel	The message channel to create and send GenICam GenApi events.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.GevServer contains interfaces and classes for using the Common Vision Blox GigE Vision Server in Cvb.Net. The Common Vision Blox GigE Vision Server presents a CVB image source as a GigE Vision camera. For additional information see the GEV Server part in the Common Vision Blox Online Reference.
CNode	Base class of all server nodes.
CNodeDictionary	A dictionary holding dependent nodes of a Parent node.
CNodeDictionaryBase	Base class for all GevServer node dictionaries.
CNodeMap	GevServer NodeMap.
CReplyStatusEventArgs	Notify the remote client about the success of the event operation.
CSelectorNode	GenApi.SelectorNode that is configurable.
CStream	The stream to send Images or other data.
CStringNode	GenApi.StringNode that is configurable.
CStringRegNode	StringNode that is a register.
CValueNode	Node having a value.
CValueVariant	A variant stores one value of either type T1 or T2.
►NManto
NProperties
►CClassifier	Manto classifier object.
CClassInformation	Information about one of the classes in a Classifier.
CClassInformationCollection	Collection for classifier-based class information. Classifier-based class information is a bit more scarce because it lacks the sample list.
►CClassifierFactory	Learner object that creates a classifier from an image list.
CLearnProgressEventArgs	Arguments for the LearnProgress event.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Manto contains the classes and definitions needed for using the Common Vision Blox Manto tool.
►CSampleImageList	Class that wraps a Manto SIL
CClassInformation	Base class for providing SIL class informations
CClassInformationCollection	ClassInformationCollection helper class for MantoSampleImageList
CSampleInformationCollection	Collection of samples inside a class of an SampleImageList.
CSearchResult	Results provided by Manto classifier searches.
►NMatch3D
CAlign	Match3D ICP - Functionality of the CVMatch3D.dll.
CAlignmentParameters	Parameters to configure the Align.IcpMatch(PointCloud, PointCloud, AlignmentParameters) algorithm.
CAlignmentResult	Result of a Match3D ICP alignment operation.
►NMinos
NProperties
►CClassifier	Minos classifier object.
CModelInformation	Information about a Minos classifier model.
CModelInformationCollection	Collection of model informations.
CClassifierFactory	Learner object that creates a classifier from an image list.
CConsistencyCheckEventArgs	Event data for the ConsistencyCheckProgress events on various objects.
CCorrelation	Correlation functions that come with the Minos library.
CFilter	Filter functions that come with the Minos library.
CImageAddedEventArgs	Event data for the TrainingSet's TrainingSet.ImageAdded event.
CImageRemovedEventArgs	Event data for the TrainingSet's TrainingSet.ImageRemoved event.
CInstanceAddedEventArgs	Event data for the TrainingSet's TrainingSet.InstanceAdded event.
CInstanceRemovedEventArgs	Event data for the TrainingSet's TrainingSet.InstanceRemoved event.
CLearnParameters	The set of parameters that controls how a classifier is being learned from a training set.
CLearnProgressEventArgs	Arguments for the LearnProgress event.
CModelAddedEventArgs	Event data for the TrainingSet's TrainingSet.ModelAdded event.
CModelRemovedEventArgs	Event data for the TrainingSet's TrainingSet.ModelRemoved event.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Minos contains the classes and definitions needed for using the Common Vision Blox Minos tool.
CSearchResult	Search Result as returned by Minos
►CTrainingSet	A Minos Training Set from which a classifier can be generated.
CImageInfo	Image that has been added to a training set.
CImageInfoCollection	Class that maintains the collection of Training Images inside a Minos Training Set.
CImageInstanceInfoCollection	Instance information collection that is attached to a training set image.
CInstanceInfo	InstanceInformation that has been added to a training set.
CInstanceInfoCollection	Class that maintains the collection of Training Images inside a Minos Training Set.
CModelInfo	InstanceInformation that has been added to a training set.
CModelInfoCollection	ModelInformationCollection class that aggregates the collection of Models inside a Minos Training Set.
CModelInstanceInfoCollection	Instance information collection that is attached to a training set model.
CTrainingSetObject	Base class for all objects that can be inside a training set.
CTrainingSetObjectInfoCollection	Additional inheritance level of the InformationCollection object from the Image Manager wrapper that specifies stronger constraints on the TInfo generic parameter
►NMovie2
NProperties
►NRecordingEngine
CDirectShowSettings	Settings for the DirectShowEngine.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Movie2.RecordingEngine contains the settings objects for the different available recording engines.
CRawVideoSettings	Settings for the RawVideoEngine.
CRecordingSettings	Settings for a IRecordingEngine.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Movie2 contains the classes and definitions needed for using the Common Vision Blox Movie2 tool.
CRecorder	Movie2 recorder for writing video files to disk.
►NPolimago
NProperties
►NTesting
CClassificationTestResult	Classification test result object.
►CConfusionMatrix	Representation of a confusion matrix. A confusion matrix is a matrix that gives detailed information about the kind of mistakes that occurred during a leave-out or sample test.
CPredictionResult	The information contained in each cell of the confusion matrix.
CHoldoutTestResultFactory	Factory object for holdout tests.
CNamespaceDoc	The namespace Stemmer.Cvb.Polimago.Testing contains classes and definitions that help testing a given training set versus either a test set or versus itself by means of a leave-out-test.
CRegressionTestResult	Regression test result object.
CSampleTestResultFactory	Factory object for running a sample test in which all the elements of a training database are classified with a given classifier.
CTestResultBase	Abstract base class for all Polimago Test Results.
CTestResultFactory	Base class for test factory classes.
►NTraining
CClassificationPredictorFactory	Predictor factory for classification predictor.
CEndProgressReportEventArgs	Progress report stage terminated.
CNamespaceDoc	The namespace Stemmer.Cvb.Polimago.Training contains classes and definitions needed for generating classifiers from training data collections.
CPolimagoFactoryException	Exception type thrown by the Polimago factory classes.
CPredictorFactoryBase	Base class for classifier factory classes.
CPredictorFactoryBaseEx	Common base class for classifier factories for regression and classification classifiers.
CProgressReportEventArgs	Progress step report.
CProgressReportEventArgsBase	Event argument base class for progress reports.
CRegressionPredictorFactory	Factory class for regression predictors.
CSearchPredictorFactory	Factory class for the generation of search predictors.
CStartProgressReportEventArgs	Start progress report event argument
CClassificationPredictor	Predictor to classify patterns with.
CClassificationResult	Polimago classification result container.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Polimago contains the classes and definitions needed for using the Common Vision Blox Polimago tool.
CPolimagoExtensions	Extension methods for the Stemmer.Cvb.Polimago library.
CPolimagoFactoryCreatedObject	Base class for Polimago objects created by one of the factory classes.
CPolimagoRefCountedObject	Base class for Polimago's reference counted objects.
CPredictorBase	Base class for Polimago predictors.
CPredictorBaseEx	Base class for all Polimago predictors.
CRegressionPredictor	Polimago Regression predictor.
CSearchPredictor	Predictor that may be used for searching objects.
CSearchResult	Search results as provided by a Search Classifier.
NProperties
►NRuntime
►NInteropServices
CIntPtrUtilities	Several utility functions that make interfacing managed and unmanaged DLLs easier.
CNamespaceDoc	The namespace Stemmer.Cvb.Runtime.InteropSerices contains classes and definitions internally used for implementing CVB.Net.
COperatingSystem	Makes Operating System information accessible at runtime.
CPixelListConversion	Conversion functions from unmanaged PIXELLIST objects to managed lists.
CProcessing	Utility functions used for marshaling processing function calls.
CSafeBarcodeReaderConfigHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Barcode readers (which for some reason do not follow standard reference counting).
CSafeCvbObjectHandle	Safe-destruct handle wrapper for IntPtr-based resources that are pseudo COM objects released through ReleaseObject
CSafeIntPtrHandle	Safe-destruct handle wrapper for IntPtr-based resources.
CSafeMantoClassifierHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Manto Classifiers (which never were proper IUnknown objects)
CSafeMantoImageListHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Manto Classifiers (which never were proper IUnknown objects)
CSafeMinosClassifierHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Minos Classifiers (which are not proper pseudo on the 32 bit plaform since CVB 7.2.1)
CSafeMinosTrainingSetHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Minos Classifiers (which are not proper pseudo on the 32 bit platform since CVB 7.2.1)
CSafePolimagoObjectHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Polimago search classifiers.
CSafeShapeFinderClassifierHandle	Safe-destruct handle wrapper for IntPtr-based resources that are Minos Classifiers (which are not proper pseudo on the 32 bit platform since CVB 7.2.1)
CStringUtilities	Several utility functions that make interfacing managed and unmanaged DLLs easier.
►NSampleDatabase
NProperties
CFringes	Object describing the fringes that are available around images in a sample image list.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.SampleDatabase contains the classes and definitions needed for using the SIL.dll
►CSampleClassificationImageList	Classifier type that operates on images.
CImageClassificationInfoCollection	Collection of class information inside a classification sample list.
CImageClassificationLabelInfo	Classification label information
CSampleDatabaseExtensions	Extension methods for use with generic collections
►CSampleImageList	Classifier type that operates on images.
CImageCollection	Collection of image samples
CImageLabelInfo	Base class for providing SIL label information.
►CSampleList	Base class for sample lists. Sample lists can serve two different purposes: Classification or Regression. For each case, a separate derived class has been implemented (SampleClassificationImageList and SampleRegressionImageList), while this class contains those elements that are common to both types of classifier.
CILabelInfo	Interface for label information.
CISampleListChild	Interface for anything that is child of a native sample image list (i.e. has a handle to the parent list through which the managed calls may be routed).
CLabelInfoCollection	Information collection for class labels.
CSampleCollection	Collection of data samples. SampleImageList.
CSampleListDataType	Base class for image list data type descriptors.
CSampleListImageDataType	Descriptor for image data to be digested by an image list.
►CSampleRegressionImageList	Classifier type that operates on images.
CImageRegressionInfoCollection	Collection of regression information inside a regression sample list.
CImageRegressionLabelInfo	Regression Label Information.
►NShapeFinder
NProperties
CClassifier	ShapeFinder classifier object.
CClassifierFactory	Object that holds methods for generating ShapeFinder classifiers. In case of ShapeFinder 1 the learner contains only static methods as no complex state aggregations are required here.
CClassifierObject	Base class for ShapeFinder classifiers.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.ShapeFinder contains the classes and definitions needed for using the ShapeFinder functionality from SF.dll.
CSearchResult	Search result obtained with a ShapeFinder (1) classifier.
►NShapeFinder2
CClassifier	ShapeFinder2 classifier object.
CClassifierFactory	Object that aggregates the learning parameters and produces a ShapeFinder2 classifier
CFilter	Filter functions exported and used by the ShapeFinder library.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.ShapeFinder2 contains the classes and definitions needed for using the ShapeFinder 2 functionality from SF.dll.
CSearchResult	A single ShapeFinder2 search result.
►NSpectral
►CColorConversion	Color conversion of hyperspectral cubes.
CInterpolator	Spectral interpolator class containing the interpolated values of the relative spectral power distribution from color matching functions and standard illuminant
CContinuousCube	Cube owning a continuous buffer.
CCube	Base class for cubes.
CCubeArithmetic	Arithmetic operations on cubes.
CCuboid	Range struct for cubes.
CLinearAccessData	Linear access to a Cube.
CLinearNonOwningCube	Linear cube that doesn't own a buffer.
CMappedCube	Cube mapping the memory of another cube.
CMetaData	Meta information attached to a Cube.
CStackedCube	Cube owning a non-continuous buffer.
►NUtilities
CLicenseInfo	Information about CVB licenses.
CMagicNumberEntry	A single Magic Number entry.
CNamespaceDoc	The namespace Stemmer.Cvb.Utilities contains classes and definitions based on the functionality from the CVCUtilities.dll, namely high performance counters and system parameter queries.
CRateCounter	Frame Rate Measurement counter with selectable averaging window.
CStopWatch	Speed measurement object with selectable accuracy, based on the functions exported by the CVCUtilities.dll.
CSystemInfo	Provides information about the CVB installation on your System.
CUsTimeSpan	Time span with micro second granularity.
►NWebStreaming
CConverter	Base class for all converter.
CJpegConverter	Converter for sending JPEG converted image data.
CRgbaConverter	Converter for sending RGBA converted image data.
CServer	A WebSocket server for sending image data.
►NWpf
►NAdorners
CArea2DMoveThumb	Thumb that rotates the Area2D overlay
CContentAdorner	Adorner hosting any FrameworkElement.
CDisplayCanvasThumbObject	A thumb that is tailored to the requirements of the Stemmer.Cvb.Wpf.DisplayCanvas object.
CImageInfoAdorner	Adorner to show image stats.
CMeasureLineAdorner	Adorner with which pixel distance and angle regarding the x-axis is calculated.
CMouseOverInfoAdorner	Mouse over info adorner.
CMoveThumb	Semi-Generic move thumb for ImageOverlays
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Adorners contains adorners that may be used with CVB's WPF display.
CRectangleAdorner	Adorner that simply displays a rectangle.
CResizeThumb	A resizer thumb, tailored to the requirements of objects living on a DisplayCanvas.
CTextAdorner	Base class for all adorners displaying text.
CZoomAdorner	Display adorner that shows a zoom slider.
►NBehaviors
CLimitedOverlayAOI	Behavior that restricts an overlay's coordinates to a certain region.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Behaviors contains definitions of behaviors to use in WPF objects.
►NBitOverlays
CBitOverlayBase	Base class of all overlays painting in the overlay bit of an overlay image.
CBrushBitOverlay	Drawing brush for draw/erase overlay bits.
CFillBitOverlay	Fill tool for flood filling overlay bits.
CLineBitOverlay	Drawer to draw a single line in the bit mask.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.BitOverlays contains classes and definitions to work with the CVB bit overlays.
►NControls
CDisableableMouseWheelScrollViewer	A scroll viewer on which mouse wheel handling can be disabled.
CDisplay	Displays images with optional overlays and zoom control.
CDisplayCanvas	This canvas displays an image in the background and arranges its children according to the pixel coordinates of the image.
CDisplayZoomEventArgs	Event arguments for all display zoom related events.
CGenApiGrid	Property grid control to show all GenICam GenApi feature Nodes from a NodeMap.
CIDisplay	Common CVB WPF Display interface.
CImageEditor	A display control with support for drawing in the overlay bit-plane of an image.
CImageSourceChangedEventArgs	Bubbling event to inform about image source changes.
CMeasureLine	Defines a measure line with display of the control's width/height. May be used inside a grid to display another control's extent.
CMeasureLineExtensions	Extension methods for types involved in the implementation of MeasureLine.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Controls contains controls for use in WPF applications.
►NConverters
CBoolInversionConverter	Converter that inverts a boolean value.
CBoolToVisibilityConverter	Converter that takes a bool value and translates it into a visibility.
CComparisonToVisibilityConverter	Converter that takes a bool value and translates it into a visibility.
CGlowConverter	Converter that converts a brush into a slightly brighter and more transparent version of itself.
CMathConverter	Converts the binding values according to the mathematical expression in the parameter.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Converters contains controls for use in Bindings in WPF applications.
CNoEmptyStringConverter	Converter that inverts a boolean value.
CProductConverter	Converter that builds the product of an arbitrary number of input values or over an input value and a constant.
CTernaryEqualityCheckConverter	Compares the binding values 1 and 2. If both are equal (or not equal, depending on the parameter value...) then value 3 is returned, otherwise value 4 is returned. Any value beyond 4 will be ignored.
CThicknessComposeConverter	Composes a Thickness value from 1 or more input values, potentially doing calculations on them as defined by the converter parameter.
►NImageEditorTools
CIApplicable	Interface for tools which have an Apply step.
CImageEditorToolBase	Base class for all ImageEditor tools.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.ImageEditorTools contains editor tools that may be used on an Controls.ImageEditor.
►NImaging
CBitmapSource	BitmapSource for Image objects.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Imaging contains utility classes and definitions for adapting CVB to WPF bitmap sources.
NMathParser
►NOverlays
CArea2DOverlay	Interaction logic for Area2DOverlay.xaml
CControlOverlay	Display overlay placed on the display canvas.
CCrosshairOverlay	This overlay paints
CExtentIndicator	Interaction logic for ExtentIndicator.xaml
CFeatureOverlay	Combines LabeledRectOverlay with a CrosshairOverlay like the ModelRectOverlay.
CHorizontalRulerOverlay	Interaction logic for RulerOverlay.xaml
CImageOverlay	Display overlay placed on the displayed image.
CLabeledRectOverlay	Like a label that adorns a rectangular area instead of a point.
CLabelOverlay	Interaction logic for Label.xaml
CModelRectOverlay	Combined CrosshairOverlay for model anchor points in an LabeledRectOverlay.
CMovableImageOverlay	An overlay that can be dragged, resized at its borders, or both.
CNamespaceDoc	The namespace Stemmer.Cvb.Wpf.Overlays contains overlays that may be used on Controls.Display objects.
CNonClippingImageOverlay	Base class for image overlays that should not be clipped (i.e. that extend beyond their definition).
COverlayBase	Base class for Display overlays.
COverlayCanvas	An overlay canvas is a canvas for overlays which is on top of the DisplayCanvas in the visual tree.
CRectangleOverlay	Overlay simply showing a rectangle that is optionally movable.
CRectSelectOverlay	Interaction logic for RectSelectOverlay.xaml
CTextImageOverlay	Base class for readable (shadowed) text overlays on a display.
CTrackerBox	Interaction logic for TrackerBox.xaml
NProperties
►NRuntime
NInteropServices
NShapes
CClickDetector	Utility class for detecting mouse click events on controls that do not exhibit a MouseClick event.
CClipboard	Copy a Image object to the clipboard.
CFileDialogs	Container class for utility functions for file dialogs.
CImageExtensions	Collection of extension methods that involve the type Image.
CImageToImageSourceConverter	Converts a Image into an ImageSource.
CMiscExtensions	Collection of miscellaneous extension methods that did not fit in anywhere else. Image.
CMouseClickEventArgs	Arguments for the mouse click event.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb.Wpf contains definitions for a display for WPF applications and overlays to go with that display.
CPropertyChangeNotifier	Helper to not root (keep alive) the target object if registering on value change events.
CRectExtensions	Extension methods for the Rect.
CVisualTreeHelperExtensions	Extends the VisualTreeHelper class.
CAffineMatrix2D	Compacted affine matrix for 2D operations.
CAffineMatrix3D	Affine transformation for 3D containing a transformation matrix and a translation vector.
CAnalyze	A collection functions available in the Common Vision Blox Image Manager for analyzing image content.
CAngle	Object for convenient and type-safe handling of angles.
CAngleMath	Provides trigonometry functions that work with Angle objects.
CArea2D	Structure that represents an area of interest in the image.
CAtCalibrator3D	Calibrator to create point clouds from Automation Technologies cameras.
CCalibrator3D	Object used to reconstruct point clouds.
CComponentsPointer3D	Point components of a point cloud.
CComposite	Aggregates multiple CVB objects under a common Purpose.
CConnectionStateChangeEventArgs	Event arguments of the Device.ConnectionStateChanged event.
CConvert3D	Conversion functions for 3D objects.
CConvertColorSpace	Simple color space conversion routines that are covered by the CVB Image Manager license.
CCuboid	3-dimensional range construct.
CCvbException	Base exception for all Cvb exceptions.
CDataType	Data type description for a Image plane.
CDataTypes	Contains common CVB DataTypes.
CDenseComponentsPointer3D	Generic point components of a DensePointCloud.
CDensePointCloud	Dense point cloud object
CDevice	Generic CVB physical device.
CDeviceFactory	Factory object for creating Device objects.
CErrorCodes	Native CVB error codes.
CFactors3D	3D factor struct.
CFactorsCalibrator3D	Calibrator that multiplies the created X, Y and Z components with predefined factors.
CFeatureExtent	The rectangular extent of a feature relative to an anchor point.
CFileImage	An Image loaded from the file system.
CGapFillingOptions	Options for gap filling with Process.FillGaps(ImagePlane, GapFillingOptions).
CGeometryFit	Fitting algorithms for geometric objects.
CIAreaOfInterest	Base Interface for all areas of interest
CImage	The Common Vision Blox image.
CImageData	Stores the access data for image access.
CImageDrawer	Immediate mode drawing on a Image plane.
CImagePlane	Plane information container.
CImagePlaneCollection	Collection of plane informations.
CImagePlaneExtensions	Extension methods used on image planes.
CINamed	Interface for anything that has a name.
CINativeHandle	Base interface for Cvb objects that are accessible through a native handle.
CIPosition	Interface for anything that denotes a position.
CIQualified	Interface for anything that has a quality (e.g. search results).
CIRotated	Interface for anything that has a rotation.
CIScaled	Interface for anything that has a scale.
CISized	Interface for anything that has a size.
CLaserPlaneCalibrator3D	Calibrator for applying parameters for calibrating laser plane.
CLaserPlaneHomographyCalibrator3D	Calibrator that uses the Metric created X-Z matrix to rectify the laser line triangulated range map.
CLaserPlaneZigZagCalibrator3D	Calibrator that uses the ZigZag algorithm to rectify the laser line triangulated range map.
CLinearAccessData	Linear Access properties.
CLinearPlaneAccess1D	Linear access to a plane;
CLocalMaximum	Result type returned by the FindLocalMaxima function
CMappedImage	A mapped Common Vision Blox image.
CMatrix2D	Double precision 2x2 Matrix struct.
CMatrix3D	Double precision 3x3 matrix struct.
CMatrix3DH	Double precision 4x4 matrix struct.
CMatrixCalibrator3D	Calibrator that multiplies the X, Y and Z components vector with a 4x4 matrix.
CMesh	3D mesh object consisting of polygons.
CNamespaceDoc	The namespace and assembly Stemmer.Cvb holds all published definitions of the types that form Cvb.Net.
COverlayBitDrawer	Immediate mode drawing on Image overlay plane(s).
CPanoramicMappedImage	Mapped image of two merged source images.
CPfncFormatValue	Helper methods for PfncFormat values.
CPinholeCameraCalibrator3D	Calibrator the calculates the X, Y and Z components via the pinhole camera model.
CPixelFormatConverter	Helper class that takes care of pixel format conversion.
CPlane	A single linear plane of component data.
CPlaneConfiguration	Structure defining the plane order for painting Image objects.
CPlaneEnumerator	Container for a set of planes.
CPlaneLinkCollection	Collection of linked planes of a MappedImage.
CPoint2D	Multi-purpose 2D Point class
CPoint2Dd	Multi-purpose 2D Point class
CPoint3Dcd	Multi-purpose 3D float vector struct with confidence value.
CPoint3Dcf	Multi-purpose 3D float vector struct with confidence value.
CPoint3Dd	Multi-purpose 3D double vector struct.
CPoint3Df	Multi-purpose 3D float vector struct.
CPoint3Dhd	Multi-purpose homogeneous 3D double vector struct.
CPoint3Dhf	Multi-purpose homogeneous 3D float vector struct.
CPointCloud	Base class for point clouds.
CPointCloudExtensions	Extension methods for PointClouds.
CPolygon3D	A polygon in 3D space.
CProcess	Collection of functions available for image processing.
CPropertyValueChangedEventArgs	Generic event arguments for property value changes.
CRange	Struct defining a range.
CRect	Cvb Rectangle structure.
CRectD	Corresponds in intention and use with the type RectD, although RectD is far more widely used.
CRectEventArgs	Event arguments transporting a rectangular area.
CRef	Class to store a reference to a value type in.
CRgbColor	Color type resembling that of System.Drawing.Color but which can be used without the System.Drawing dependency.
CRotationAngles3D	Rotation angle struct.
CScopedState	Simple object for writing RAII-like scoped states (see example).
CSensorSettings	Class to store camera sensor settings.
CSize2D	Stores an ordered pair of integers, typical the width and height of a Rect.
CSize2Dd	Stores an ordered pair of doubles, typical the width and height of a RectD.
CSparseComponentsPointer3D	Generic point components of a SparsePointCloud.
CSparsePointCloud	Sparse point cloud object
CSystemExtensions	Extension methods for types located in the System name space.
CTransform3D	Transformation functions for 3D objects.
CTransformations	Container class for a selection of functions that perform a (non-geometric) transformation on the input image.
CValueRange	Container for range definitions.
►CVpat	Virtual Pixel Access Table.
CEntry	One entry of the VPAT.
CIndexerBase	Indexer object for X and Y VPAT access.
CIntIndexer	Indexer that returns an Int32 offset.
CIntPtrIndexer	Indexer that returns an IntPtr offset.
CLongIndexer	Indexer that returns an Int64 offset.
CVpatAccessData	Typed VPAT access properties with coordinate pixel access.
CWhiteBalance	WhiteBalance functions inside the Image Manager.
CWhiteBalanceFactors	Factors for white balance correction.
►CWrappedImage	A wrapped image wraps another pixel buffer without owning it.
CPixelFormatInfo	Information extracted from Bitmap pixel format.