Immediate mode drawing on Image overlay plane(s). More...

Static Public Member Functions
static void	DrawLine (ImagePlane plane, OverlayBitDrawMode mode, int thickness, int x1, int y1, int x2, int y2)
	Draws/erases a line on the given Image overlay plane depending on mode . More...

static void	DrawLine (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Point2D pt1, Point2D pt2)
	Draws/erases a line on the given Image overlay plane depending on mode . More...

static void	DrawLine (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Line line)
	Draws/erases a line on the given Image overlay plane depending on mode . More...

static void	DrawLines (ImagePlane plane, OverlayBitDrawMode mode, int thickness, params Point2D[] points)
	Draws multiple connected lines as by the given points on the given Image plane . More...

static void	DrawLine (Image image, OverlayBitDrawMode mode, int thickness, int x1, int y1, int x2, int y2)
	Draws a line on all planes of the given image . More...

static void	DrawLine (Image image, OverlayBitDrawMode mode, int thickness, Point2D pt1, Point2D pt2)
	Draws a line on all planes of the given image . More...

static void	DrawLine (Image image, OverlayBitDrawMode mode, int thickness, Line line)
	Draws a line on all planes of the given image . More...

static void	DrawLines (Image image, OverlayBitDrawMode mode, int thickness, params Point2D[] points)
	Draws multiple connected lines as by the given points on all image planes. More...

static void	DrawCircle (ImagePlane plane, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radius)
	Draws a circle border on the given Image plane . More...

static void	DrawCircle (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Point2D center, int radius)
	Draws a circle border on the given Image plane . More...

static void	DrawCircle (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Circle circle)
	Draws a circle border on the given Image plane . More...

static void	DrawCircle (Image image, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radius)
	Draws a circle border on the given image . More...

static void	DrawCircle (Image image, OverlayBitDrawMode mode, int thickness, Point2D center, int radius)
	Draws a circle border on the given image . More...

static void	DrawCircle (Image image, OverlayBitDrawMode mode, int thickness, Circle circle)
	Draws a circle border on the given image . More...

static void	FillCircle (ImagePlane plane, OverlayBitDrawMode mode, int centerX, int centerY, int radius)
	Fills a circle on the given Image plane . More...

static void	FillCircle (ImagePlane plane, OverlayBitDrawMode mode, Point2D center, int radius)
	Fills a circle on the given Image plane . More...

static void	FillCircle (ImagePlane plane, OverlayBitDrawMode mode, Circle circle)
	Fills a circle on the given Image plane . More...

static void	FillCircle (Image image, OverlayBitDrawMode mode, int centerX, int centerY, int radius)
	Fills a circle on the given image . More...

static void	FillCircle (Image image, OverlayBitDrawMode mode, Point2D center, int radius)
	Fills a circle on the given image . More...

static void	FillCircle (Image image, OverlayBitDrawMode mode, Circle circle)
	Fills a circle on the given image . More...

static void	DrawEllipse (ImagePlane plane, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radiusA, int radiusB, Angle rotation)
	Draws an ellipse border on the given Image plane . More...

static void	DrawEllipse (ImagePlane plane, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radiusA, int radiusB)
	Draws an ellipse border on the given Image plane with zero degrees rotation. More...

static void	DrawEllipse (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Point2D center, int radiusA, int radiusB, Angle rotation)
	Draws an ellipse border on the given Image plane . More...

static void	DrawEllipse (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Point2D center, int radiusA, int radiusB)
	Draws an ellipse border on the given Image plane and zero degrees rotation. More...

static void	DrawEllipse (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Ellipse ellipse)
	Draws an ellipse border on the given Image plane . More...

static void	DrawEllipse (Image image, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radiusA, int radiusB, Angle rotation)
	Draws an ellipse border on the given image . More...

static void	DrawEllipse (Image image, OverlayBitDrawMode mode, int thickness, int centerX, int centerY, int radiusA, int radiusB)
	Draws an ellipse border on the given image . More...

static void	DrawEllipse (Image image, OverlayBitDrawMode mode, int thickness, Point2D center, int radiusA, int radiusB, Angle rotation)
	Draws an ellipse border on the given image . More...

static void	DrawEllipse (Image image, OverlayBitDrawMode mode, int thickness, Point2D center, int radiusA, int radiusB)
	Draws an ellipse border on the given image . More...

static void	DrawEllipse (Image image, OverlayBitDrawMode mode, int thickness, Ellipse ellipse)
	Draws an ellipse border on the given image . More...

static void	FillEllipse (ImagePlane plane, OverlayBitDrawMode mode, int centerX, int centerY, int radiusA, int radiusB, Angle rotation)
	Fills an ellipse on the given Image plane . More...

static void	FillEllipse (ImagePlane plane, OverlayBitDrawMode mode, int centerX, int centerY, int radiusA, int radiusB)
	Fills an ellipse on the given Image plane with zero degrees rotation. More...

static void	FillEllipse (ImagePlane plane, OverlayBitDrawMode mode, Point2D center, int radiusA, int radiusB, Angle rotation)
	Fills an ellipse on the given Image plane . More...

static void	FillEllipse (ImagePlane plane, OverlayBitDrawMode mode, Point2D center, int radiusA, int radiusB)
	Fills an ellipse on the given Image plane and zero degrees rotation. More...

static void	FillEllipse (ImagePlane plane, OverlayBitDrawMode mode, Ellipse ellipse)
	Fills an ellipse on the given Image plane . More...

static void	FillEllipse (Image image, OverlayBitDrawMode mode, int centerX, int centerY, int radiusA, int radiusB, Angle rotation)
	Fills an ellipse on all planes of the given image . More...

static void	FillEllipse (Image image, OverlayBitDrawMode mode, int centerX, int centerY, int radiusA, int radiusB)
	Fills an ellipse on all planes of the given image with zero degrees rotation. More...

static void	FillEllipse (Image image, OverlayBitDrawMode mode, Point2D center, int radiusA, int radiusB, Angle rotation)
	Fills an ellipse on all planes of the given Image More...

static void	FillEllipse (Image image, OverlayBitDrawMode mode, Point2D center, int radiusA, int radiusB)
	Fills an ellipse on all planes of the given image with zero degrees rotation. More...

static void	FillEllipse (Image image, OverlayBitDrawMode mode, Ellipse ellipse)
	Fills an ellipse on all planes of the given image . More...

static void	FloodFill (ImagePlane plane, OverlayBitDrawMode mode, int centerX, int centerY)
	Fills a closed region in the given Image, either setting or resetting the overlay bitsplane . More...

static void	FloodFill (ImagePlane plane, OverlayBitDrawMode mode, Point2D center)
	Fills a closed region in the given Image, either setting or resetting the overlay bitsplane . More...

static void	FloodFill (Image image, OverlayBitDrawMode mode, int centerX, int centerY)
	Fills a closed region in the given Image, either setting or resetting the overlay bits. More...

static void	FloodFill (Image image, OverlayBitDrawMode mode, Point2D center)
	Fills a closed region in the given Image, either setting or resetting the overlay bits. More...

static void	DrawRectangle (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Area2D rectangle)
	Set/erase the overlay bits on a rectangular frame. More...

static void	DrawRectangle (ImagePlane plane, OverlayBitDrawMode mode, int thickness, Rect rectangle)
	Set/erase the overlay bits on a rectangular frame. More...

static void	DrawRectangle (Image image, OverlayBitDrawMode mode, int thickness, Area2D rectangle)
	Set/erase the overlay bits on a rectangular frame. More...

static void	DrawRectangle (Image image, OverlayBitDrawMode mode, int thickness, Rect rectangle)
	Set/erase the overlay bits on a rectangular frame. More...

static void	FillRectangle (ImagePlane plane, OverlayBitDrawMode mode, Area2D rectangle)
	Set/erase the overlay bits on a filled rectangle. More...

static void	FillRectangle (ImagePlane plane, OverlayBitDrawMode mode, Rect rectangle)
	Set/erase the overlay bits on a filled rectangle. More...

static void	FillRectangle (Image image, OverlayBitDrawMode mode, Area2D rectangle)
	Set/erase the overlay bits on a filled rectangle. More...

static void	FillRectangle (Image image, OverlayBitDrawMode mode, Rect rectangle)
	Set/erase the overlay bits on a filled rectangle. More...

Detailed Description

Immediate mode drawing on Image overlay plane(s).

Member Function Documentation

◆ DrawCircle() [1/6]

static void DrawCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Circle	circle
	)

static

Draws a circle border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
circle	Circle to draw.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawCircle() [2/6]

static void DrawCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radius
	)

static

Draws a circle border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the circle.
centerY	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawCircle() [3/6]

static void DrawCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radius
	)

static

Draws a circle border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawCircle() [4/6]

static void DrawCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Circle	circle
	)

static

Draws a circle border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
circle	Circle to draw.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawCircle() [5/6]

static void DrawCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radius
	)

static

Draws a circle border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the circle.
centerY	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawCircle() [6/6]

static void DrawCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radius
	)

static

Draws a circle border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [1/10]

static void DrawEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Ellipse	ellipse
	)

static

Draws an ellipse border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
ellipse	Ellipse to draw.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [2/10]

static void DrawEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB
	)

static

Draws an ellipse border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [3/10]

static void DrawEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Draws an ellipse border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [4/10]

static void DrawEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radiusA,
		int	radiusB
	)

static

Draws an ellipse border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [5/10]

static void DrawEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Draws an ellipse border on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [6/10]

static void DrawEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Ellipse	ellipse
	)

static

Draws an ellipse border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
ellipse	Ellipse to draw.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [7/10]

static void DrawEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB
	)

static

Draws an ellipse border on the given Image plane with zero degrees rotation.

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [8/10]

static void DrawEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Draws an ellipse border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [9/10]

static void DrawEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radiusA,
		int	radiusB
	)

static

Draws an ellipse border on the given Image plane and zero degrees rotation.

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawEllipse() [10/10]

static void DrawEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	center,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Draws an ellipse border on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawLine() [1/6]

static void DrawLine	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	x1,
		int	y1,
		int	x2,
		int	y2
	)

static

Draws a line on all planes of the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
x1	X component of start point.
y1	Y component of start point.
x2	X component of end point.
y2	Y component of end point.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Image of given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawLine() [2/6]

static void DrawLine	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Line	line
	)

static

Draws a line on all planes of the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
line	Line to draw.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Image of given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawLine() [3/6]

static void DrawLine	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	pt1,
		Point2D	pt2
	)

static

Draws a line on all planes of the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
pt1	Start point.
pt2	End point.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Image of given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawLine() [4/6]

static void DrawLine	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		int	x1,
		int	y1,
		int	x2,
		int	y2
	)

static

Draws/erases a line on the given Image overlay plane depending on mode .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
x1	X component of start point.
y1	Y component of start point.
x2	X component of end point.
y2	Y component of end point.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.
FormatException	plane has no overlay bit set (not an overlay Image).

◆ DrawLine() [5/6]

static void DrawLine	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Line	line
	)

static

Draws/erases a line on the given Image overlay plane depending on mode .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
line	Line to draw.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.
FormatException	plane has no overlay bit set (not an overlay Image).

◆ DrawLine() [6/6]

static void DrawLine	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Point2D	pt1,
		Point2D	pt2
	)

static

Draws/erases a line on the given Image overlay plane depending on mode .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
pt1	Start point.
pt2	End point.

Exceptions

ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.
FormatException	plane has no overlay bit set (not an overlay Image).

◆ DrawLines() [1/2]

static void DrawLines	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		params Point2D[]	points
	)

static

Draws multiple connected lines as by the given points on all image planes.

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
points	Points to draw lines with.

Exceptions

ArgumentNullException	image or points is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Image of given image was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawLines() [2/2]

static void DrawLines	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		params Point2D[]	points
	)

static

Draws multiple connected lines as by the given points on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
thickness	Line thickness in pixels.
points	Points to draw lines with.

Exceptions

ArgumentNullException	points is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Image of given plane was disposed.
ArgumentException	The thickness is smaller than one.

◆ DrawRectangle() [1/4]

static void DrawRectangle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Area2D	rectangle
	)

static

Set/erase the overlay bits on a rectangular frame.

Parameters

image	Image to draw to (all planes will be painted to).
mode	Draw mode (set/erase).
thickness	Line thickness with which to draw.
rectangle	Rectangle to draw.

◆ DrawRectangle() [2/4]

static void DrawRectangle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	thickness,
		Rect	rectangle
	)

static

Set/erase the overlay bits on a rectangular frame.

Parameters

image	Image to draw to (all planes will be painted to).
mode	Draw mode (set/erase).
thickness	Line thickness with which to draw.
rectangle	Rectangle to draw.

◆ DrawRectangle() [3/4]

static void DrawRectangle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Area2D	rectangle
	)

static

Set/erase the overlay bits on a rectangular frame.

Parameters

plane	Plane to draw to.
mode	Draw mode (set/erase).
thickness	Line thickness with which to draw.
rectangle	Rectangle to draw.

◆ DrawRectangle() [4/4]

static void DrawRectangle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	thickness,
		Rect	rectangle
	)

static

Set/erase the overlay bits on a rectangular frame.

Parameters

plane	Plane to draw to.
mode	Draw mode (set/erase).
thickness	Line thickness with which to draw.
rectangle	Rectangle to draw.

◆ FillCircle() [1/6]

static void FillCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		Circle	circle
	)

static

Fills a circle on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
circle	Circle to draw.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillCircle() [2/6]

static void FillCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radius
	)

static

Fills a circle on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the circle.
centerY	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillCircle() [3/6]

static void FillCircle	(	Image	image,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radius
	)

static

Fills a circle on the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillCircle() [4/6]

static void FillCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Circle	circle
	)

static

Fills a circle on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
circle	Circle to draw.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillCircle() [5/6]

static void FillCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radius
	)

static

Fills a circle on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the circle.
centerY	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillCircle() [6/6]

static void FillCircle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radius
	)

static

Fills a circle on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the circle.
radius	Radius of the circle in pixels.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillEllipse() [1/10]

static void FillEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		Ellipse	ellipse
	)

static

Fills an ellipse on all planes of the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
ellipse	Ellipse to draw.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillEllipse() [2/10]

static void FillEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB
	)

static

Fills an ellipse on all planes of the given image with zero degrees rotation.

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillEllipse() [3/10]

static void FillEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Fills an ellipse on all planes of the given image .

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillEllipse() [4/10]

static void FillEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radiusA,
		int	radiusB
	)

static

Fills an ellipse on all planes of the given image with zero degrees rotation.

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillEllipse() [5/10]

static void FillEllipse	(	Image	image,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Fills an ellipse on all planes of the given Image

Parameters

image	Image to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ArgumentNullException	image is `null` (`Nothing` in Visual Basic).
ObjectDisposedException	Given image was disposed.

◆ FillEllipse() [6/10]

static void FillEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Ellipse	ellipse
	)

static

Fills an ellipse on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
ellipse	Ellipse to draw.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillEllipse() [7/10]

static void FillEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB
	)

static

Fills an ellipse on the given Image plane with zero degrees rotation.

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillEllipse() [8/10]

static void FillEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Fills an ellipse on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
centerX	Center point of the ellipse.
centerY	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillEllipse() [9/10]

static void FillEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radiusA,
		int	radiusB
	)

static

Fills an ellipse on the given Image plane and zero degrees rotation.

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillEllipse() [10/10]

static void FillEllipse	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Point2D	center,
		int	radiusA,
		int	radiusB,
		Angle	rotation
	)

static

Fills an ellipse on the given Image plane .

Parameters

plane	Image plane to draw on.
mode	Either OverlayBitDrawMode.Set or OverlayBitDrawMode.Erase the overlay bits.
center	Center point of the ellipse.
radiusA	Length of the first semi major axis. The first semi major is the one that coincides with the x axis if the rotation of the ellipse is 0.
radiusB	Length of the second semi major axis. The second semi major is the one that coincides with the y axis if the rotation of the ellipse is 0.
rotation	Rotation of the ellipse in degrees.

Exceptions

ObjectDisposedException Image of given plane was disposed.

◆ FillRectangle() [1/4]

static void FillRectangle	(	Image	image,
		OverlayBitDrawMode	mode,
		Area2D	rectangle
	)

static

Set/erase the overlay bits on a filled rectangle.

Parameters

image	Image to draw to.
mode	Draw mode (set/erase).
rectangle	Rectangle to draw.

◆ FillRectangle() [2/4]

static void FillRectangle	(	Image	image,
		OverlayBitDrawMode	mode,
		Rect	rectangle
	)

static

Set/erase the overlay bits on a filled rectangle.

Parameters

image	Image to draw to.
mode	Draw mode (set/erase).
rectangle	Rectangle to draw.

◆ FillRectangle() [3/4]

static void FillRectangle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Area2D	rectangle
	)

static

Set/erase the overlay bits on a filled rectangle.

Parameters

plane	Plane to draw to.
mode	Draw mode (set/erase).
rectangle	Rectangle to draw.

◆ FillRectangle() [4/4]

static void FillRectangle	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Rect	rectangle
	)

static

Set/erase the overlay bits on a filled rectangle.

Parameters

plane	Plane to draw to.
mode	Draw mode (set/erase).
rectangle	Rectangle to draw.

◆ FloodFill() [1/4]

static void FloodFill	(	Image	image,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY
	)

static

Fills a closed region in the given Image, either setting or resetting the overlay bits.

Parameters

image	Image to paint on.
mode	Set/Unset bit.
centerX	X coordinate of the fill center.
centerY	Y coordinate of the fill center.

◆ FloodFill() [2/4]

static void FloodFill	(	Image	image,
		OverlayBitDrawMode	mode,
		Point2D	center
	)

static

Fills a closed region in the given Image, either setting or resetting the overlay bits.

Parameters

image	Image to paint on.
mode	Set/Unset bit.
center	Coordinates of the fill center.

◆ FloodFill() [3/4]

static void FloodFill	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		int	centerX,
		int	centerY
	)

static

Fills a closed region in the given Image, either setting or resetting the overlay bitsplane .

Parameters

plane	Plane to paint on.
mode	Set/Unset bit.
centerX	X coordinate of the fill center.
centerY	Y coordinate of the fill center.

◆ FloodFill() [4/4]

static void FloodFill	(	ImagePlane	plane,
		OverlayBitDrawMode	mode,
		Point2D	center
	)

static

Fills a closed region in the given Image, either setting or resetting the overlay bitsplane .

Parameters

plane	Plane to paint on.
mode	Set/Unset bit.
center	Coordinates of the fill center.

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ DrawCircle() [1/6]

◆ DrawCircle() [2/6]

◆ DrawCircle() [3/6]

◆ DrawCircle() [4/6]

◆ DrawCircle() [5/6]

◆ DrawCircle() [6/6]

◆ DrawEllipse() [1/10]

◆ DrawEllipse() [2/10]

◆ DrawEllipse() [3/10]

◆ DrawEllipse() [4/10]

◆ DrawEllipse() [5/10]

◆ DrawEllipse() [6/10]

◆ DrawEllipse() [7/10]

◆ DrawEllipse() [8/10]

◆ DrawEllipse() [9/10]

◆ DrawEllipse() [10/10]

◆ DrawLine() [1/6]

◆ DrawLine() [2/6]

◆ DrawLine() [3/6]

◆ DrawLine() [4/6]

◆ DrawLine() [5/6]

◆ DrawLine() [6/6]

◆ DrawLines() [1/2]

◆ DrawLines() [2/2]

◆ DrawRectangle() [1/4]

◆ DrawRectangle() [2/4]

◆ DrawRectangle() [3/4]

◆ DrawRectangle() [4/4]

◆ FillCircle() [1/6]

◆ FillCircle() [2/6]

◆ FillCircle() [3/6]

◆ FillCircle() [4/6]

◆ FillCircle() [5/6]

◆ FillCircle() [6/6]

◆ FillEllipse() [1/10]

◆ FillEllipse() [2/10]

◆ FillEllipse() [3/10]

◆ FillEllipse() [4/10]

◆ FillEllipse() [5/10]

◆ FillEllipse() [6/10]

◆ FillEllipse() [7/10]

◆ FillEllipse() [8/10]

◆ FillEllipse() [9/10]

◆ FillEllipse() [10/10]

◆ FillRectangle() [1/4]

◆ FillRectangle() [2/4]

◆ FillRectangle() [3/4]

◆ FillRectangle() [4/4]

◆ FloodFill() [1/4]

◆ FloodFill() [2/4]

◆ FloodFill() [3/4]

◆ FloodFill() [4/4]