|
Image Control Reference 14.0
|
|
|
Image Control Reference 14.0
|
Variables | |
| double | AreaX0 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | AreaX1 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | AreaX2 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | AreaY0 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | AreaY1 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | AreaY2 |
| The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control. More... | |
| double | CSA11 |
| The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control. More... | |
| double | CSA12 |
| The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control. More... | |
| double | CSA21 |
| The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control. More... | |
| double | CSA22 |
| The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control. More... | |
| boolean | Entire |
| This property write-protects the AreaX0 to AreaY2 properties. More... | |
| BSTR | Filename |
| Determines the file name of the image object. More... | |
| boolean | Grab |
| Defines whether the image object is in grab mode. More... | |
| __int3264 | Image |
| Determines the image object that is assigned to the Common Vision Image Control. More... | |
| long | ImageDimension |
| Returns the dimension of the image. More... | |
| long | ImageHeight |
| Returns the height of the image. More... | |
| long | ImageWidth |
| Returns the width of the image. More... | |
| boolean | IsGrabber |
| Specifies whether the image is an image from a hardware driver. More... | |
| double | OriginX |
| The OriginX and OriginY properties modify the origin of the coordinate system of the image that is contained int the Image Control. More... | |
| double | OriginY |
| The OriginX and OriginY properties modify the origin of the coordinate system of the image that is contained int the Image Control. More... | |
| boolean | PingPongEnabled |
| Enables or disables the ping-pong or Grab2 mode of a hardware driver. More... | |
| boolean | ResetCS |
| Specifies whether the coordinate system is reset or not. More... | |
| double | RotationX |
| The coordinate system in the Image Control can be rotated independetly in the x and y directions. More... | |
| double | RotationY |
| The coordinate system in the Image Control can be rotated independetly in the x and y directions. More... | |
| double | ScaleX |
| The coordinate system in the Image Control can be scaled independently in the x and y directions. More... | |
| double | ScaleY |
| The coordinate system in the Image Control can be scaled independently in the x and y directions. More... | |
| long | SerialNumber |
| Returns the serial number of the Common Vision Blox protection device. More... | |
| double AreaX0 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaX0 | X coordinate of point 0. |
| double AreaX1 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaX1 | X coordinate of point 1. |
| double AreaX2 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaX2 | X coordinate of point 2. |
| double AreaY0 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaY0 | Y coordinate of point 0. |
| double AreaY1 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaY1 | Y coordinate of point 1. |
| double AreaY2 |
The AreaX0 to AreaY2 properties are storage locations for an area of interest that can be defined interactively at design time and saved with the Control.
The area of interest can be read out and transferred to other Common Vision Blox components at runtime. Each Image Control saves its own area of interest. In this way it is possible to implement several area of interests referring to the same image object. Add several Image Controls to the dialog, load an image into one Control (the master) and set all Image properties of the further Image Controls to the Image property value of the master.
TRUE, this property has read-only status. | [in,out] | AreaY2 | Y coordinate of point 2. |
| double CSA11 |
The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control.
| [in,out] | CSA11 | A11 value in the coordinate system. |
| double CSA12 |
The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control.
| [in,out] | CSA12 | A12 value in the coordinate system. |
| double CSA21 |
The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control.
| [in,out] | CSA21 | A21 value in the coordinate system. |
| double CSA22 |
The CSA11 to CSA22 properties change the coordinate system of the image contained int the Image Control.
| [in,out] | CSA22 | CSA22 value in the coordinate system. |
| boolean Entire |
This property write-protects the AreaX0 to AreaY2 properties.
TRUE, the properties have read-only status. | [in,out] | Entire | Entire value. |
TRUE specifies that the properties have read-only status, otherwise FALSE indicates read and write status. | BSTR Filename |
Determines the file name of the image object.
When the property has changed the image is loaded from the hard disk. If you exit the program the image does not need to be unloaded explicitly. Supports also environment variables enclosed in % signs as they are used in the command prompt (cvb%\Tutorial\Clara.bmp).
| [in,out] | Filename | Complete path for the Filename. |
| boolean Grab |
Defines whether the image object is in grab mode.
long as this property is set to TRUE. The ImageSnaped event is triggered for every new image. The image is processed within this event. | [in,out] | Grab | Sets grab status. |
TRUE if grab is enabled, otherwise FALSE. | __int3264 Image |
Determines the image object that is assigned to the Common Vision Image Control.
The image object manages the image information, e.g. the images from hard disk or a image acquisition device driver.
| [in,out] | Image | Handle of the image object. |
|
readonly |
Returns the dimension of the image.
1 indicates that this image is a gray scale image and 3 stands for a true color image.
| [out] | ImageDimension | Dimension of the image. |
|
readonly |
Returns the height of the image.
| [out] | ImageHeight | Height of the image. |
|
readonly |
Returns the width of the image.
| [out] | ImageWidth | Width of the image. |
|
readonly |
Specifies whether the image is an image from a hardware driver.
In this case, for example, the Grab property of the Display Control can be set to True in order to display a live image from the camera.
| [out] | IsGrabber | Indicates, if the image is an image from a hardware driver. |
TRUE if the image is from a hardware driver, otherwise FALSE. | double OriginX |
The OriginX and OriginY properties modify the origin of the coordinate system of the image that is contained int the Image Control.
0. | [in,out] | OriginX | X origin of the coordinate system. |
| double OriginY |
The OriginX and OriginY properties modify the origin of the coordinate system of the image that is contained int the Image Control.
0. | [in,out] | OriginX | Y origin of the coordinate system. |
| boolean PingPongEnabled |
Enables or disables the ping-pong or Grab2 mode of a hardware driver.
In the ping-pong mode, the image is processed and the next image is acquired in parallel.
The first image in a ping-pong sequence contains invalid image data. In Grab2 mode the driver uses instead of two images a ringbuffer of images to acquire the data into. The acquistion into the next available buffer is also done in parallel.
With its parallel processing, ping-pong and Grab2 modes accelerates the application tremendously, but not all hardware supports one of the two interfaces. ///
TRUE when the Global Ping Pong Enable flag in the registry is ENABLED (via the function SetGlobalPingPongEnabled). Otherwise FALSE means that the value of the PingPongEnabled property is ignored for all instances of the Image Control and PingPong or Grab2 will be deactivated. | [in,out] | PingPongEnabled | Set the ping pong status. |
TRUE if ping pong is enabled, otherwise FALSE. | boolean ResetCS |
Specifies whether the coordinate system is reset or not.
When a new image is assigned to the Image Control by the Image property and ResetCS is TRUE, the coordinate system of the Image Control will be set to the image's coordinate system. This means i.e. that the RotationX, RotationY, ScaleX, ScaleY, CSA11 to CSA22 properties of the Control will be set to the values of the image.
If ResetCS is FALSE the coordiante system of the image will be set to the values of the Control.
If the Control allready contains an image the operation is done immediatly on the current image.
| [in,out] | ResetCS | Reset coordinate system status. |
TRUE specifies that the coordinate system is reset on a new Image, otherwise FALSE means that the coordinate system is NOT reset on a new Image. | double RotationX |
The coordinate system in the Image Control can be rotated independetly in the x and y directions.
If RotationX and RotationY have the same value the axes are perpendicular to each other.
If the properties have different values the axes form a parallelogram. This can be useful for recognition of italic fonts, for example. In italic fonts only the y axis of the coordinate system is rotated.
| [in,out] | RotationX | Rotation in the x direction. |
| double RotationY |
The coordinate system in the Image Control can be rotated independetly in the x and y directions.
If RotationX and RotationY have the same value the axes are perpendicular to each other.
If the properties have different values the axes form a parallelogram. This can be useful for recognition of italic fonts, for example. In italic fonts only the y axis of the coordinate system is rotated.
| [in,out] | RotationY | Rotation in the x direction. |
| double ScaleX |
The coordinate system in the Image Control can be scaled independently in the x and y directions.
If ScaleX and ScaleY have the same value the image will be enlarged or reduced equally.
If the properties have different values it is possible, for example, to level out non-square pixels of an image acquisition device.
| [in,out] | ScaleX | X value for scaling. |
| double ScaleY |
The coordinate system in the Image Control can be scaled independently in the x and y directions.
If ScaleX and ScaleY have the same value the image will be enlarged or reduced equally.
If the properties have different values it is possible, for example, to level out non-square pixels of an image acquisition device.
| [in,out] | ScaleY | Y value for scaling. |
|
readonly |
Returns the serial number of the Common Vision Blox protection device.
0. | [out] | SerialNumber | Serial number of the CVB protection device. |
0 if no protection device could be found.