<< Click to Display Table of Contents >> Navigation: CVB Configurator > USB3 Vision Devices |
✓Connect Camera to USB3 Port
Your USB3 Vision Device must be connected into an USB external or on-board Host controller card with USB 3.0 ports (usually marked blue ).
Use therefore an USB 3.0 cable:
- maximum length 5m,
- we highly recommend the use of machine vision validated USB cables
✓ Start the CVB GenICam Browser and search for available devices
For details refer GenICam Browser User Guide (also local in %CVB%Doc (Windows) or /opt/cvb/doc (Linux).
✓Configure Device Driver parameters
For details refer GenICam Browser User Guide.
✓ Configure Camera Features using the Nodemap in Property Grid
For feature availability and options refer Camera Manuals:
https://www.stemmer-imaging.de/en/