Functions
cvbres_t	AreaSubImage (IMG ImgIn, TArea Area, TInterpolationMode Interpolation, IMG &ImgOut)
	Create a new image based on an area in an existing image. More...

cvbres_t	CalcPerspectiveTransformation (long dstLeft, long dstTop, long dstRight, long dstBottom, double srcX0, double srcY0, double srcX1, double srcY1, double srcX2, double srcY2, double srcX3, double srcY3, double &C00, double &C01, double &C02, double &C10, double &C11, double &C12, double &C20, double &C21, double &C22)
	Computes the coefficients C00 to C22 to be used by the function PerspectiveTransformImage. More...

cvbres_t	CalcPerspectiveTransformationEx (double dstLeft, double dstTop, double dstRight, double dstBottom, double srcX0, double srcY0, double srcX1, double srcY1, double srcX2, double srcY2, double srcX3, double srcY3, double &C00, double &C01, double &C02, double &C10, double &C11, double &C12, double &C20, double &C21, double &C22)
	Computes the coefficients C00 to C22 to be used by the function PerspectiveTransformImage. More...

cvbres_t	MatrixTransformImage (IMG ImgIn, TMatrix Matrix, TInterpolationMode Interpolation, IMG &ImgOut)
	Applies a transformation matrix to the input image. More...

cvbres_t	MirrorImage (IMG ImgIn, cvbbool_t MirrorX, cvbbool_t MirrorY, IMG &ImgOut)
	Create a mirrored version (vertically, horizontally or in both directions) of the input image. More...

cvbres_t	PerspectiveTransformImage (IMG ImgIn, long DstWidth, long DstHeight, long DstXOffset, long DstYOffset, double C00, double C01, double C02, double C10, double C11, double C12, double C20, double C21, double C22, TInterpolationMode Interpolation, IMG &ImgOut)
	Performs perspective transformation of the source image using the give transformation coefficients. More...

cvbres_t	ResizeImage (IMG ImgIn, long TargetWidth, long TargetHeight, TInterpolationMode Interpolation, IMG &ImgOut)
	Resizes an input image to match a given input width and height. More...

cvbres_t	RotateImage (IMG ImgIn, double Angle, TInterpolationMode Interpolation, IMG &ImgOut)
	Rotates an image by a given angle. More...

cvbres_t	ShearImage (IMG ImgIn, double ShearX, double ShearY, TInterpolationMode Interpolation, IMG &ImgOut)
	Shears an image in X and Y direction. More...

Detailed Description

Function Documentation

◆ AreaSubImage()

cvbres_t AreaSubImage	(	IMG	ImgIn,
		TArea	Area,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Create a new image based on an area in an existing image.

For the creation of the sub-image, the coordinate of the input image is being used. 
This function is similar to the function \a CreateAreaSubImage in the CVCImg.dll, but it differs in that with this function, 
the interpolation mode is selectable, and that \a CreateAreaSubImage does not suffer from the restriction that all points of the Area must be inside the image.

Parameters

[in]	ImgIn	Handle of input image.
[in]	Area	Area of the source image that will be the newly created sub-image. Attention: All points of the Area must lie within the source image, otherwise an error will be returned.
[in]	Interpolation	Interpolation mode to be used when creating the new sub image. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ CalcPerspectiveTransformation()

cvbres_t CalcPerspectiveTransformation	(	long	dstLeft,
		long	dstTop,
		long	dstRight,
		long	dstBottom,
		double	srcX0,
		double	srcY0,
		double	srcX1,
		double	srcY1,
		double	srcX2,
		double	srcY2,
		double	srcX3,
		double	srcY3,
		double &	C00,
		double &	C01,
		double &	C02,
		double &	C10,
		double &	C11,
		double &	C12,
		double &	C20,
		double &	C21,
		double &	C22
	)

Computes the coefficients C00 to C22 to be used by the function PerspectiveTransformImage.

The function \ref PerspectiveTransformImage amps a source area of interest from the specified source quadrangle into the specified target rectangle.

Attention: The source quadrangle must be a convex structure (which means, that the connecting line of any two corners of the quadrangle must not lie outside the quadrangle), otherwise this function will return an error.

Parameters

[in]	dstLeft	Left side of the destination rectangle.
[in]	dstTop	Top side of the destination rectangle.
[in]	dstRight	Right side of the destination rectangle.
[in]	dstBottom	Bottom side of the destination rectangle.
[in]	srcX0	Corresponds to the untransformed top-left corner of the source area of interest.
[in]	srcY0	Corresponds to the untransformed top-left corner of the source area of interest.
[in]	srcX1	Corresponds to the untransformed top-right corner of the source area of interest.
[in]	srcY1	Corresponds to the untransformed top-right corner of the source area of interest.
[in]	srcX2	Corresponds to the untransformed bottom-right corner of the source area of interest.
[in]	srcY2	Corresponds to the untransformed bottom-right corner of the source area of interest.
[in]	srcX3	Corresponds to the untransformed bottom-left corner of the source area of interest.
[in]	srcY3	Corresponds to the untransformed bottom-left corner of the source area of interest.
[out]	C00	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C01	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C02	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C10	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C11	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C12	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C20	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C21	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C22	Target perspective transform coefficients used by PerspectiveTransformImage.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: PerspectiveTransformImage, Introduction

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ CalcPerspectiveTransformationEx()

cvbres_t CalcPerspectiveTransformationEx	(	double	dstLeft,
		double	dstTop,
		double	dstRight,
		double	dstBottom,
		double	srcX0,
		double	srcY0,
		double	srcX1,
		double	srcY1,
		double	srcX2,
		double	srcY2,
		double	srcX3,
		double	srcY3,
		double &	C00,
		double &	C01,
		double &	C02,
		double &	C10,
		double &	C11,
		double &	C12,
		double &	C20,
		double &	C21,
		double &	C22
	)

Computes the coefficients C00 to C22 to be used by the function PerspectiveTransformImage.

The function \ref PerspectiveTransformImage amps a source area of interest from the specified source quadrangle into the specified target rectangle.

Attention: The source quadrangle must be a convex structure (which means, that the connecting line of any two corners of the quadrangle must not lie outside the quadrangle), otherwise this function will return an error.

This is effectively a complete alias for CalcPerspectiveTransformation.

Parameters

[in]	dstLeft	Left side of the destination rectangle.
[in]	dstTop	Top side of the destination rectangle.
[in]	dstRight	Right side of the destination rectangle.
[in]	dstBottom	Bottom side of the destination rectangle.
[in]	srcX0	Corresponds to the untransformed top-left corner of the source area of interest.
[in]	srcY0	Corresponds to the untransformed top-left corner of the source area of interest.
[in]	srcX1	Corresponds to the untransformed top-right corner of the source area of interest.
[in]	srcY1	Corresponds to the untransformed top-right corner of the source area of interest.
[in]	srcX2	Corresponds to the untransformed bottom-right corner of the source area of interest.
[in]	srcY2	Corresponds to the untransformed bottom-right corner of the source area of interest.
[in]	srcX3	Corresponds to the untransformed bottom-left corner of the source area of interest.
[in]	srcY3	Corresponds to the untransformed bottom-left corner of the source area of interest.
[out]	C00	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C01	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C02	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C10	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C11	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C12	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C20	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C21	Target perspective transform coefficients used by PerspectiveTransformImage.
[out]	C22	Target perspective transform coefficients used by PerspectiveTransformImage.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: PerspectiveTransformImage, Introduction

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ MatrixTransformImage()

cvbres_t MatrixTransformImage	(	IMG	ImgIn,
		TMatrix	Matrix,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Applies a transformation matrix to the input image.

TMatrix defines a 2x2 transformation matrix, see definition of TMatrix in the Image Manager documentation.
This function is almost identical with the Image Manager function \a CreateMatrixTransformedImage,
save for the fact that the latter does not support a selectable interpolation.

Parameters

[in]	ImgIn	Handle of input image.
[in]	Matrix	Transformation matrix to be applied to the input image.
[in]	Interpolation	Interpolation mode to be used. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode, CreateMatrixTransformedImage and CreateMatrixTransformedImageEx

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ MirrorImage()

cvbres_t MirrorImage	(	IMG	ImgIn,
		cvbbool_t	MirrorX,
		cvbbool_t	MirrorY,
		IMG &	ImgOut
	)

Create a mirrored version (vertically, horizontally or in both directions) of the input image.

Attention: Please have also a look at the possibilities the VPAT offers for image transformation. See GetImageVPA function of the Image Manager and read the Proposal for a Common Image Model for further detailed information on all aspects of virtual pixel access.

Parameters

[in]	ImgIn	Handle of input image.
[in]	MirrorX	`TRUE` means mirroring to the X axis, `FALSE` otherwise.
[in]	MirrorY	`TRUE` means mirroring to the Y axis, `FALSE` otherwise.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: RotateImage,
GetImageVPA function of the Image library

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ PerspectiveTransformImage()

cvbres_t PerspectiveTransformImage	(	IMG	ImgIn,
		long	DstWidth,
		long	DstHeight,
		long	DstXOffset,
		long	DstYOffset,
		double	C00,
		double	C01,
		double	C02,
		double	C10,
		double	C11,
		double	C12,
		double	C20,
		double	C21,
		double	C22,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Performs perspective transformation of the source image using the give transformation coefficients.

The coefficients are usually created by the function CalcPerspectiveTransformation first.

Parameters

[in]	ImgIn	Handle of input image.
[in]	DstWidth	Width of the transformed image.
[in]	DstHeight	Height of the transformed image.
[in]	DstXOffset	Ignored.
[in]	DstYOffset	Ignored.
[in]	C00	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C01	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C02	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C10	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C11	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C12	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C20	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C21	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	C22	Perspective transform coefficients. Created by CalcPerspectiveTransformation.
[in]	Interpolation	Interpolation mode to be used. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode, Introduction

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ ResizeImage()

cvbres_t ResizeImage	(	IMG	ImgIn,
		long	TargetWidth,
		long	TargetHeight,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Resizes an input image to match a given input width and height.

Parameters

[in]	ImgIn	Handle of input image.
[in]	TargetWidth	Width for the output image.
[in]	TargetHeight	Height for the output image.
[in]	Interpolation	Interpolation mode to be used. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode, CreateMatrixTransformedImage, CreateMatrixTransformedImageEx, CreateImageMap

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ RotateImage()

cvbres_t RotateImage	(	IMG	ImgIn,
		double	Angle,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Rotates an image by a given angle.

Attention: For images coming from an image acquisition device supported by Common Vision Blox via a vin-driver there is in a lot of cases another easy and very fast option to rotate images. Please have a look at the device specific CVB User Guide in the INI-file section.

Parameters

[in]	ImgIn	Handle of input image.
[in]	Angle	Rotation angle in degrees.
[in]	Interpolation	Interpolation mode to be used. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode, CreateMatrixTransformedImage and CreateMatrixTransformedImageEx

Examples:: C# (CSharp) - C# Geometrical Transformation Example

◆ ShearImage()

cvbres_t ShearImage	(	IMG	ImgIn,
		double	ShearX,
		double	ShearY,
		TInterpolationMode	Interpolation,
		IMG &	ImgOut
	)

Shears an image in X and Y direction.

Attention: Keep in mind that abs(ShearX) = abs(ShearY) = 1 is not allowed as parameters, because that would project the whole image into a single line.

Parameters

[in]	ImgIn	Handle of input image.
[in]	ShearX	Specifies the amount of shearing in X direction.
[in]	ShearY	Specifies the amount of shearing in Y direction
[in]	Interpolation	Interpolation mode to be used. Allowable values are IP_NearestNeighbour, IP_Linear and IP_Cubic.
[out]	ImgOut	Image handle of result image.

Returns: 0 : OK
< 0: an error occurred.

Supported platforms:: Win32
Win64

Related Topics:: TInterpolationMode

Examples:: C# (CSharp) - C# Geometrical Transformation Example


Contact Legal Privacy Statement	Copyright © 2024.
	All rights reserved.

Functions

Detailed Description

Function Documentation

◆ AreaSubImage()

◆ CalcPerspectiveTransformation()

◆ CalcPerspectiveTransformationEx()

◆ MatrixTransformImage()

◆ MirrorImage()

◆ PerspectiveTransformImage()

◆ ResizeImage()

◆ RotateImage()

◆ ShearImage()