Grabber Control Reference 14.1
Enumerations

Enumerations

enum  DcOperation {
  DC_GET = 0x00000000 , DC_SET = 0x10000000 , DC_GETMIN = 0x20000000 , DC_GETMAX = 0x30000000 ,
  DC_VERIFY = 0x40000000
}
 Command Operation. More...
 
enum  ImagePropertyChangedAnswer { IMAGEPROPCHANGE_ANSWER_OK = 0 , IMAGEPROPCHANGE_ANSWER_CANCEL = 1 }
 Answer that is returned to the driver. More...
 
enum  ImagePropertyChangedReason { IMAGEPROPCHANGE_REASON_BFORE_IMAGE_CHANGE = 0 , IMAGEPROPCHANGE_REASON_AFTER_IMAGE_CHANGE = 1 , IMAGEPROPCHANGE_REASON_NEW_IMAGESIZE = 2 , IMAGEPROPCHANGE_REASON_TIMEOUT = 3 }
 Reason why the ImagePropertyChanged event is fired. More...
 
enum  ImageRectCommand {
  IMAGERECT_CMD_GET = 0 , IMAGERECT_CMD_SET_AUTODELETE = 1 , IMAGERECT_CMD_VALIDATE = 2 , IMAGERECT_CMD_SET = 3 ,
  IMAGERECT_CMD_RESET = 4
}
 Command to be executed. More...
 
enum  TriggerMode { TriggerDisable = 0 , TriggerOnField = 1 , TriggerResetRestart = 2 }
 Trigger modes specified in the ITrigger interface. More...
 

Detailed Description

Enumeration Type Documentation

◆ DcOperation

Command Operation.

Enumerator
DC_GET 

Gets the current setting of the parameter.

DC_SET 

Sets the current setting of the parameter.

DC_GETMIN 

Gets the minimum valid value for a parameter (if possible).

DC_GETMAX 

Gets the maximum valid value for a parameter (if possible).

DC_VERIFY 

Verifies the validity of a parameter settings without actually setting it (if possible).

◆ ImagePropertyChangedAnswer

Answer that is returned to the driver.

Enumerator
IMAGEPROPCHANGE_ANSWER_OK 

The property can be changed.

IMAGEPROPCHANGE_ANSWER_CANCEL 

Cancel the operation and do not modify the property.

◆ ImagePropertyChangedReason

Reason why the ImagePropertyChanged event is fired.

Enumerator
IMAGEPROPCHANGE_REASON_BFORE_IMAGE_CHANGE 

An image property will change after the function returns.

IMAGEPROPCHANGE_REASON_AFTER_IMAGE_CHANGE 

An image property changed.

IMAGEPROPCHANGE_REASON_NEW_IMAGESIZE 

An image property will change after the function returns.

IMAGEPROPCHANGE_REASON_TIMEOUT 

A timeout occured while changing a property.

◆ ImageRectCommand

Command to be executed.

Enumerator
IMAGERECT_CMD_GET 

Get actual values.

IMAGERECT_CMD_SET_AUTODELETE 

Set new values. The closest possible set of values are set and returned. The previous image is automatically released.

IMAGERECT_CMD_VALIDATE 

Validate values. The closest possible set of values are returned.

IMAGERECT_CMD_SET 

Set new values. The closest possible set of values are set and returned. The previous image will not be released.

IMAGERECT_CMD_RESET 

Reset values to driver defaults.

◆ TriggerMode

Trigger modes specified in the ITrigger interface.

Enumerator
TriggerDisable 

Trigger is disabled.

TriggerOnField 

Trigger is enabled at the next vertical blank of the camera.

TriggerResetRestart 

Asynchronous trigger.